Friday, June 20, 2014

Music Flashbacks

Everything But the Girl - Missing Remix (2007)
Bit of a remix I was working on in 2007, came across it on my old macbook this evening so I thought I'd keep it alive. Maybe one day I'll revisit it.


Work in Progress (2007)
Another little piece I was working on, not sure what genre you'd label this... cheerful trance?...

Monday, February 4, 2013

Norco Build Part Two


So it's been about 6 months since I started this and I've just lost time but I'm back on and I'm determined to get this finished. Here I'm putting in the two Intel dual port PCI-E NICs and popping it all in the Norco. Some more cable management is required...

Next up I've got some power requirements on the way and rough audio comparison with the stock fans vs. the Noctua's and Cougar's.


Intel dual port PCI-E NIC
Requires PCI-E 4x
All components finally in
The backplane squeeze
SAS cards and NICs in
Bottom two backplanes connected to onboard SATA
As I said cable manangement required
The Noctua gear is top quality =)

Wednesday, July 11, 2012

Norco Build Part One

So I've been receiving parts for the new NAS over the past few weeks and I've started the build.
Here's what I've got:
Norco 4224
Norco 4224 120mm fanwall
Asrock Z77 Extreme4-M
Intel i5 3750K
Noctua NH-U9B-SE2 CPU Cooler
2x 16GB EVO Corsa DD3 1333 MHz Kits
Supermicro AOC-USAS2-L8e
Intel RES2SV240 Expander 
Corsair HX-650M Modular
3x Cougar CF-V12HPB Vortex PWM 120mm
2x Noctua NF-R8 PWM 80mm
2x Akasa PWM splitters AK-CB002

I've got more pics and info to come but here's a taster...
24 bays of hot swapping goodness
Nice small power and reset buttons
80mm fanwall, my 120mm fans are mounted
on the other side of the fanwall. It was way
too tight for the molex connectors otherwise.
Backplane showing the 6 SAS connectors
Backplane showing the redundant molex connectors
The 80mm fanwall which I would see replaced
with the 120mm version.
Corsair HX650 modular PSU.
Asrock Z77 Extreme4-M
Stock Intel cooler for the i5 3750K,
the profile is pretty low these days!
GEIL EVO Corsa 16GB RAM Kit
32GB's in full glory
Closer look how the 80mm fanwall is setup.
The fans are able to slide out and are connected in serial.
While these push a fair amount of air they are very loud
and the supplied 3 pin to molex connector doesn't help!
Supermicro AOC-USAS2-L8e PCI-e x4 2.0
The backing plate is actually mounted backwards
however I had no issues just removing it and
sitting it in the slot.
Intel RES2SV240 Expander, the molex connecter feels
like it could come off the board with too many disconnect/reconnects.
Low profile adapter if you need it plus you also get
6x 8087 to 8087 SAS cables (2 of these are only small
probably with the assumption you will be connecting
to a hba nearby). 
Fanwall?... kind of...
Noctua NF-R8 PWM 80mm, comes well packaged with low and ultra low noise adapters.
Cougar CF-V12HPB Vortex PWM 120mm, not as generous as the Noctua in terms of accessories.
Noctua NH-U9B-SE2 CPU Cooler, the beast with 2 92mm non-PWM fans. Intel and AMD mounting kits included.
Almost makes me want to install a perspex window...
CPU, fan and RAM installed...
I attempted briefly to remove the RAM heatsinks
however they seem glued in place and I felt I would snap
them so I moved the fan up slightly. Not the best look but it
still performs great!

Thursday, June 14, 2012

TeraCopy vs. Windows Copy

I've been using TeraCopy now for a while and though it was pretty good, that was until the other day. As I'm using ZFS at home through FreeNAS 8 I decided to test out if my network connection maxed out when reading a file directly from the ZFS ARC. Simply put the ARC stores recently used files directly in RAM and sends it straight out when requested rather than going back to the pool. 
Anyway to get things started I copied a 2GB FreeBSD iso down to my local SSD drive on my Win7 x64 machine just to get the file in ARC. I then proceeded to copy the file down again with TeraCopy and got a measly 40MB/s. Now I thought there was something fishy going on with my ZFS pool for months now but never really took the time to investigate. I thought just for the hell of it I'll bypass TeraCopy and copy the same file using the inbuilt Windows file copier.... straight away I was hit with speeds that maxed out my network connection. Trust me when I say I've tested this more than once and on more than one machine, TeraCopy does not live up to it's claim on the website. "TeraCopy is designed to copy and move files at the maximum possible speed."

I look forward to increasing my ARC size and adding in an SSD for L2ARC to provide increased read performance from this and future NAS'


Tuesday, June 12, 2012

NAS Upgrade

The plan is to create a NAS based on ZFS that will supply me with massive storage at really fast speeds. I also don't want it to chew through the power or sound like a 747 so I will endeavour to go low power where I can with minimal component noise. However if going low power means sacrificing too much processing power I'll live with the power bill =)

I'm currently running ZFS on my HP Microserver N36L populated with 5x 2TB Hitachi's in a RAIDZ configuration. The power consumption from this is about 70W idle but it can get up to 85W when it's processing, this is something that I am going to miss when it gets replaced. The access and transfer speeds aren't too bad but at times I feel the processing power of the AMD cpu struggles to keep up.

Here's my general idea which is subject to change but some of this gear I've already started ordering:
Norco 4224 (received this week)
Intel i5 3750K
Mainboard with Dual Intel LAN
Intel Dual LAN PCI-E
32GB DDR3 Non-ECC
SSD for ZFS L2ARC
Seagate 2TB drives (R.I.P Hitachi)
Supermicro AOC-USAS2-L8e (ordered)
Intel RES2SV240 Expander (ordered)
Corsair TX-650M Modular
3x Cougar CF-V12HPB Vortex PWM 120mm
2x Noctua NF-R8 PWM 80mm

Over the next few weeks I'll start putting up some pics of the gear and I'll step through each phase as I get more parts. Lots of fun and testing to come, stay tuned....